Update general drawings

book/design_workflow/general_drawing/cross_section_indications.ipynb

@@ -6,13 +6,103 @@
    "source": [
     "# Cross section indications\n",
     "\n",
-    "\n"
+    "For each material, a different hatch is used. Furthermore, the type of hatch can differ as the scale of the drawing\n",
+    "changes. This is done to make sure that at higher scales the hatches are not too complicated, as the areas to\n",
+    "hatch on the drawing decrease rapidly with increasing scale. In the tables below two markings appear:  \n",
+    "  \n",
+    ":black_circle: = Scale at which the hatch needs to be used  \n",
+    ":white_circle: = Scale at which the hatch needs to be used with the material added in text\n",
+    "  \n",
+    "The tables are based on the Dutch code NEN 47.\n",
+    "\n",
+    "## Stone-like materials\n",
+    "\n",
+    "| No. | Description                           | Hatch                                           | Scale        |              |              |              |              |              |Remarks       |\n",
+    "| --- | -----------------------               | -----                                           | -----        | -----        | ----         | ----         | ----         | ----         | ---          |\n",
+    "|     |                                       |                                                 | 1:100        |1:50          |1:20          |1:10          |1:5           |1:1           |              | \n",
+    "| 1   | Brick masonry                         |```{figure} Images/Brick 1.png```                |:black_circle:|:black_circle:|              |              |              |              |              |\n",
+    "|     |                                       |```{figure} Images/Brick 2.png```                |              |:black_circle:|:black_circle:|:black_circle:|:black_circle:|:black_circle:|              |\n",
+    "|     |                                       |```{figure} Images/Brick 3.png```                |              |:black_circle:|:black_circle:|:black_circle:|:black_circle:|:black_circle:|              |\n",
+    "| 2   | Stone-like materials                  |```{figure} Images/Stone-like.png```             |:white_circle:|       |      |        |       |       |e.g. fireproof material, roof tiles |\n",
+    "| 3   | Non-brick masonry                     |```{figure} Images/Non-brick.png```              |              |       |      |        |       |       |e.g. concrete masonry units    |\n",
+    "| 4   | Non load carrying division walls      |```{figure} Images/Non-load.png```               |              |       |      |        |       |       |                          |\n",
+    "|     |                                       |```{figure} Images/Non-load 2.png```             |              |       |      |        |       |       |                          |\n",
+    "|     |                                       |```{figure} Images/Non-load 3.png```             |              |       |      |        |       |       |                          |\n",
+    "| 5   | Reinforced concrete (cast in situ)    |```{figure} Images/Reinforced concrete.png```    |              |       |      |        |       |       |                          |\n",
+    "|     |                                       |```{figure} Images/Reinforced concrete 2.png```  |              |       |      |        |       |       |                          |\n",
+    "| 6   | Reinforced concrete (precast)         |```{figure} Images/Reinforced concrete precast.png```|   |       |      |        |       |       |                          |\n",
+    "| 7   | Plain concrete                        |```{figure} Images/Plain concrete.png```         |       |       |      |        |       |       |e.g. lightweight concrete |\n",
+    "| 8   | Decorative concrete                   |```{figure} Images/Decorative concrete.png```    |       |       |      |        |       |       |                          |\n",
+    "| 9   | Natural stone                         |```{figure} Images/Natural stone.png```          |       |       |      |        |       |       |                          |\n",
+    "| 10  | Single floor/wall finishing           |```{figure} Images/Single floor wall.png```      |       |       |      |        |       |       | e.g. plaster     |\n",
+    "| 11  | Composite floor/wall finishing        |```{figure} Images/Composite.png```              |       |       |      |        |       |       |                          |\n"
    ]
   },
   {
    "cell_type": "markdown",
    "metadata": {},
-   "source": []
+   "source": [
+    "## Timber materials"
+   ]
+  },
+  {
+   "cell_type": "markdown",
+   "metadata": {},
+   "source": [
+    "|No.| Description                        | Hatch                                | Scale        |              |              |              |              |              |Remarks       |\n",
+    "|---| -----------------------            | -----                                | -----        | -----        | ----         | ----         | ----         | ----         | ---          |\n",
+    "|   |                                    |                                      | 1:100        |1:50          |1:20          |1:10          |1:5           |1:1           |              | \n",
+    "|12 | Softwood                           |```{figure} Images/Softwood.png```     |       |       |      |        |       |       |                          |\n",
+    "|13 | Hardwood                           |```{figure} Images/Hardwood.png```      |       |       |      |        |       |       |                          |\n",
+    "|14 | Softwood/Hardwood (along the grain)|```{figure} Images/Soft-Hardwood along the grain.png```       |       |       |      |        |       |       |                          |\n",
+    "|15 | Glued seam                         |```{figure} Images/Glued seam.png```    |       |       |      |        |       |       |                          |\n",
+    "|16 | Cladding panel                     |```{figure} Images/Cladding panel.png```     |       |       |      |        |       |       |                          |\n",
+    "|17 | Isolation panel                    |```{figure} Images/Isolation panel.png```    |       |       |      |        |       |       |                          |"
+   ]
+  },
+  {
+   "cell_type": "markdown",
+   "metadata": {},
+   "source": [
+    "## Metals"
+   ]
+  },
+  {
+   "cell_type": "markdown",
+   "metadata": {},
+   "source": [
+    "| No. | Description                   | Hatch                           | Scale |              |              |              |              |              |Remarks       |\n",
+    "| --- | -----------------------       | -----                           | ----- | -----        | ----         | ----         | ----         | ----         | ---          |\n",
+    "|     |                               |                                 | 1:100 |1:50          |1:20          |1:10          |1:5           |1:1           |              | \n",
+    "| 18  | Steel                         |```{figure} Images/Steel.png```|       |       |      |        |       |       |                          |\n",
+    "| 19  | Aluminium, brass, copper etc. |```{figure} Images/Aluminium.png```|       |       |      |        |       |       |                          |\n",
+    "| 20  | Lead                          |```{figure} Images/Lead.png```|       |       |      |        |       |       |                          |\n",
+    "| 21  | Zinc                          |```{figure} Images/Zinc.png```|       |       |      |        |       |       |                          |"
+   ]
+  },
+  {
+   "cell_type": "markdown",
+   "metadata": {},
+   "source": [
+    "## Miscellaneous"
+   ]
+  },
+  {
+   "cell_type": "markdown",
+   "metadata": {},
+   "source": [
+    "| No. | Description    | Hatch                                 | Scale |       |      |              |              |              |Remarks       |\n",
+    "| --- | -------------- | -----                                 | ----- | ----- | ---- | ----         | ----         | ----         | ---          |\n",
+    "|     |                |                                       | 1:100 |1:50   |1:20  |1:10          |1:5           |1:1           |              | \n",
+    "| 22  | Synthetics     |```{figure} Images/Synthetics.png```   |       |       |      |        |       |       |                          |\n",
+    "| 23  | Sealant        |```{figure} Images/Sealant.png```      |       |       |      |        |       |       |                          |\n",
+    "| 24  | Foil, bitumen  |```{figure} Images/Foil.png```         |       |       |      |        |       |       |                          |\n",
+    "| 25  | Ground level   |```{figure} Images/Gorund level.png``` |       |       |      |        |       |       |                          |\n",
+    "| 26  | Sand           |```{figure} Images/Sand.png```         |       |       |      |        |       |       |                          |\n",
+    "| 27  | Gravel         |```{figure} Images/Gravel.png```       |       |       |      |        |       |       |                          |\n",
+    "| 28  | Water          |```{figure} Images/Water.png```        |       |       |      |        |       |       |                          |\n",
+    "| 29  | Glass          |```{figure} Images/Glass.png```        |       |       |      |        |       |       |                          |"
+   ]
   }
  ],
  "metadata": {

book/design_workflow/general_drawing/technical_drawings.ipynb

@@ -6,6 +6,12 @@
    "source": [
     "# Technical drawings\n",
     "\n",
+    "To make a clear technical drawing it is wise to follow the steps depicted below.\n",
+    "Every step discribes shortly what should be done. For more in formation\n",
+    "how it should be done reference is made to the lecture notes ‘Technical\n",
+    "Drawings’ (CT1052-09). The steps below are mainly applicable for handdrawings,\n",
+    "but are also useful for CADdrawings.\n",
+    "\n",
     "## Size and header\n",
     "Paper size can vary from A4 to A0. Most of the time A3 is chosen. Draw a\n",
     "frame which does not touch the edges of the paper.\n",