mirror of
https://github.com/TeachBooks/template.git
synced 2026-11-12 22:25:52 +00:00
Update loads and limit states
This commit is contained in:
Guus
parent
b34a1b1e8f
commit
0c95bc4cb2
1 changed files with 125 additions and 1 deletions
|
|
@ -10,7 +10,131 @@
|
|||
{
|
||||
"cell_type": "markdown",
|
||||
"metadata": {},
|
||||
"source": []
|
||||
"source": [
|
||||
"## Limits\n",
|
||||
"Every structure has to comply with two possible limit states which are directly\n",
|
||||
"related to the reliablity (strength) and usability of the structure. The Ultimate\n",
|
||||
"Limit State (ULS) is used to check structural safety. The Serviceability\n",
|
||||
"Limit State (SLS) is used to check usability."
|
||||
]
|
||||
},
|
||||
{
|
||||
"cell_type": "markdown",
|
||||
"metadata": {},
|
||||
"source": [
|
||||
"## Load combinations\n",
|
||||
"Load combinations consist of a combination of design values of\n",
|
||||
"the permanent and variable loads. Both characteristic and reduced\n",
|
||||
"characteristic loads are combined for the ULS or SLS. The determination\n",
|
||||
"of the critical combination of actions is left to the structural engineer.\n",
|
||||
"Important here is to keep in mind what kind of element you are designing: a\n",
|
||||
"beam, foundation, column or stability measures.\n",
|
||||
"\n",
|
||||
"Building structures and parts of building structures or their supports\n",
|
||||
"and connections must be sufficiently reliable during their service life. They\n",
|
||||
"must withstand the most unfavourable combination of loads that can act\n",
|
||||
"simultaneously. Exceptions:\n",
|
||||
"\n",
|
||||
"- The extreme value of a variable load does not have to be combined with the\n",
|
||||
"extreme value of other variable loads.\n",
|
||||
"- An accidental load does not have to be combined with the extreme value of\n",
|
||||
"other accidental loads or extreme variable loads.\n",
|
||||
"- For certain cases is its phyisically not possible for two loads to simultaneously\n",
|
||||
"act in their extreme or zero value in the same load combination. (e.g. snow and\n",
|
||||
"wind loads).\n",
|
||||
"\n",
|
||||
"A few basic rules according to the Eurocode (EN 1990) will be explained below."
|
||||
]
|
||||
},
|
||||
{
|
||||
"cell_type": "markdown",
|
||||
"metadata": {},
|
||||
"source": [
|
||||
"## Ultimate Limite State (ULS)\n",
|
||||
"$γ_G G_k + γ_{Q;1} Q_{1;k} + Σ(γ_{Q;i} Ψ_{0;i} Q_{i;k})$\n",
|
||||
"\n",
|
||||
"$γ_G$ = partial factor for permanent loads \n",
|
||||
"$G_k$ = total permanent load \n",
|
||||
"$γ_{Q;i}$ = partial factor for variable loads \n",
|
||||
"$Q_{1;lk}$ = characteristic value of the leading variable load \n",
|
||||
"$Ψ_{0;i}$ = factor for combination of variable load i with the leading variable load \n",
|
||||
"$Q_{i;k}$ = characteristic value of variable load i \n",
|
||||
"\n",
|
||||
"```{note}\n",
|
||||
"For a more complete explanation see: NEN-EN 1990.\n",
|
||||
"```"
|
||||
]
|
||||
},
|
||||
{
|
||||
"cell_type": "markdown",
|
||||
"metadata": {},
|
||||
"source": [
|
||||
"## Ultimate limit state: load factors ($γ$)\n",
|
||||
"\n",
|
||||
"| Design Situation | Permanent Loads | Variable Loads | Unfavourable | Favourable | Leading | Other |\n",
|
||||
"|------------------|-----------------|----------------|--------------|------------|---------|-------|\n",
|
||||
"| 1 | 1.35 | 0.9 | - | 1.5 | - | - |\n",
|
||||
"| 2 | 1.2 | 0.9 | 1.5 | 1.5 | - | - | \n",
|
||||
" \n",
|
||||
"```{note}\n",
|
||||
"A favourable load can for example be the dead load of a roof in combination with uplift forces due to wind.\n",
|
||||
"```"
|
||||
]
|
||||
},
|
||||
{
|
||||
"cell_type": "markdown",
|
||||
"metadata": {},
|
||||
"source": [
|
||||
"## Consequence classes\n",
|
||||
"\n",
|
||||
"| Concequence Class | Description | Examples | KFI |\n",
|
||||
"|-------------------|----------------------------------------------------------|-----------------------------------------------------------|-----|\n",
|
||||
"| CC1 | Low consequence for loss of human life, and economic, social or environmental consequences small or negligible | Agricultural buildings where people do not normally enter (e.g. storage buildings), greenhouses | 0.9 |\n",
|
||||
"| CC2 | Medium consequence for loss of human life, economic, social or environmental consequences considerable | Residential and office buildings, public buildings where consequences of failure are medium (e.g. an office building) | 1.0 |\n",
|
||||
"| CC3 | High consequence for loss of human life, or economic, social or environmental consequences very great | Grandstands, public buildings where consequences of failure are high (e.g. a concert hall) | 1.1 |\n",
|
||||
"\n",
|
||||
"```{note}\n",
|
||||
"To take the concequence class into account, the applicable load factors ($γ_G$ & $γ_{Q;1}$) have to be multiplied by $K_{FI}$\n",
|
||||
"```"
|
||||
]
|
||||
},
|
||||
{
|
||||
"cell_type": "markdown",
|
||||
"metadata": {},
|
||||
"source": [
|
||||
"## Load categories with corresponding $Ψ$ factors for buildings\n",
|
||||
"\n",
|
||||
"| Action Category (General Loads) | Example | Ψ0 | Ψ1 | Ψ2 |\n",
|
||||
"|----------------------------------|-----------------------------------------------------------|-----|-----|-----|\n",
|
||||
"| Category A: Domestic, Residential Areas | - | 0.4 | 0.5 | 0.3 |\n",
|
||||
"| Category B: Office Areas | - | 0.5 | 0.5 | 0.3 |\n",
|
||||
"| Category C: Congregation Areas | C1: Areas with tables (school, restaurants) | 0.25| 0.7 | 0.6 |\n",
|
||||
"| | C2: Areas with fixed seats (theatres, churches, lecture halls) | - | - | - |\n",
|
||||
"| | C3: Areas without obstacles for people (museums, hospitals) | - | - | - |\n",
|
||||
"| | C4: Areas with physical activities (dance halls, gymnastic rooms) | - | - | - |\n",
|
||||
"| | C5: Areas susceptible to large crowds (stadiums, terraces, railway platforms) | - | - | - |\n",
|
||||
"| Category D: Shopping Areas | D1: General retail | 0.4 | 0.7 | 0.6 |\n",
|
||||
"| | D2: Department stores | - | - | - |\n",
|
||||
"| Category E: Storage Areas | E1: Areas susceptible to accumulation of goods | 1.0 | 0.9 | 0.8 |\n",
|
||||
"| | E2: Industrial use | - | - | - |\n",
|
||||
"| Category F: Traffic Area, Vehicle Weight ≤ 30 kN | - | 0.7 | 0.7 | 0.6 |\n",
|
||||
"| Category G: Traffic Area, 30 kN ≤ Vehicle Weight ≤ 160 kN | - | 0.7 | 0.5 | 0.3 |\n",
|
||||
"| Category H: Roofs | - | 0 | 0 | 0 |\n",
|
||||
"\n",
|
||||
" \n",
|
||||
" \n",
|
||||
"| Other Actions (Environmental Actions) | Example | Ψ0 | Ψ1 | Ψ2 |\n",
|
||||
"|----------------------------------------|------------------------------------------------|-----|-----|-----|\n",
|
||||
"| Snow Loads on Buildings | - | 0 | 0.2 | 0 |\n",
|
||||
"| Wind Loads on Buildings | - | 0 | 0.2 | 0 |\n",
|
||||
"| Temperature on Buildings (non-fire) | - | 0 | 0.5 | 0 |\n",
|
||||
"\n",
|
||||
" \n",
|
||||
" \n",
|
||||
"$Ψ_0$ = factor for combination value of a variable action\n",
|
||||
"$Ψ_1$ = factor for frequent value of a variable action (for example used in combination with accidental loading)\n",
|
||||
"$Ψ_2$ = factor for quasi-permanent value of a variable action (for example used in creep calculations)\n"
|
||||
]
|
||||
}
|
||||
],
|
||||
"metadata": {
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue