monday moring

book/workflows/branches.md

@@ -160,7 +160,6 @@ The VS Code welcome screen.
 ```
 ````
 `````
-
 ``````
 
 ``````{tab-item} I have previously opened the repository (Branching)
@@ -196,15 +195,10 @@ Location of the branch menu.
 
 ```{error} To be written
 ```
-
 ````
 `````
 ``````
-
 ```````
-
-
-
 ````````
 `````````
 

book/workflows/edit_book.md

@@ -2,56 +2,93 @@
 
 Suppose we are writing a new chapter, or are updating an existing chapter for our Jupyter Book. We've created a new branch on which we are going to make the changes.
 
-**Edit files by ...**
+**Edit files as ...**
 `````````{tab-set}
-````````{tab-item} ... user type 3
-**... by directly adding changes on a single file to Git-timeline (committing) in ...**
+````````{tab-item} ... user type 3 ...
+
+**... by directly adding changes on a single file to the Git-timeline (committing) in ...**
+
 `````{tab-set}
 ````{tab-item} ... GitLab
 
-Make changes to file in text editor...
-or add new file by text or upload
+In GitLab, you can directly make changes in the files on the remote repositery. You can make changes to the files already in the repositery using the text editor but you can also upload new files!
 
-```{error} To be written
-```
+1. Navigate to the repositery you want to work in.
 
-click commit in single text editor ...
-```{error} To be written
-```
+2. Create a new file by clicking on the plus button in the top bar. You can either create an entirely new file by clicking `New File` or if you already have created a file you can upload it by clicking `Upload File`.
+
+<figure align="center">
+    <img src="figures/User3_NewFile.PNG" alt="Example Image" width="500">
+</figure>
+
+3. In the new window, you can start typing your content. Once you are done, commit the new file to the repositery by clicking the blue button `Commit changes`.
+
+<figure align="center">
+    <img src="figures/User3_NewFile2.PNG" alt="Example Image" width="700">
+</figure>
+
+4. In case you want to make changes to an existing file, navigate to the file in your remote repositery. Then click the blue button called `Edit` and select the option `Edit single file`.
+
+<figure align="center">
+    <img src="figures/User3_EditFile.PNG" alt="Example Image" width="700">
+</figure>
+
+5. Make your changes in the text editor and when you are ready, commit your changes to the remote repositery by clicking on the blue `Commit changes` button.
+
+<figure align="center">
+    <img src="figures/User3_EditFile2.PNG" alt="Example Image" width="700">
+</figure>
 ````
 ````{tab-item} ... GitHub
 
-Make changes to file in text editor...
-or add new file by text or upload
+In GitHub, you can directly make changes in the files on the remote repositery. You can make changes to the files already in the repositery using the text editor but you can also upload new files!
 
-```{error} To be written
-```
+1. Navigate to the repositery you want to work in.
 
-click commit in single text editor ...
-```{error} To be written
-```
+2. Create a new file by clicking on the button called `Add file` in the top bar. You can either create an entirely new file by clicking `Create new File` or if you already have created a file you can upload it by clicking `Upload files`.
+
+<figure align="center">
+    <img src="figures/HubUser3_NewFile.PNG" alt="Example Image" width="500">
+</figure>
+
+3.  In the new window, you can start typing your content. Once you are done, commit the new file to the repositery by clicking the green button `Commit changes`.
+
+<figure align="center">
+    <img src="figures/HubUser3_NewFile2.PNG" alt="Example Image" width="700">
+</figure>
+
+4. In case you want to make changes to an existing file, navigate to the file in your remote repositery. Then click the downward pointing arrow on the very left in the top bar. Select the option `Edit in place`.
+
+<figure align="center">
+    <img src="figures/HubUser3_EditFile.PNG" alt="Example Image" width="700">
+</figure>
+
+5. Make your changes in the text editor and when you are ready, commit your changes to the remote repositery by clicking on the green `Commit changes` button.
+
+<figure align="center">
+    <img src="figures/HubUser3_EditFile2.PNG" alt="Example Image" width="700">
+</figure>
 ````
 `````
-
 ````````
-````````{tab-item} ... user type 4
+````````{tab-item} ... user type 4 ...
 
 **... for ...**
-```````{tab-set}
-``````{tab-item} ... brand new version (branch)
 
-**... by making changes on a single / multiple file(s), selecting changes to be added to the Git-timeline (staging), adding those to the Git-timeline (committing) and adding those changes to GitLab/GitHub (pushing) with ...**
+```````{tab-set}
+``````{tab-item} ... a brand new version (branch)...
+
+**... by (1) making changes on a single or multiple file(s) <br> 
+         (2) selecting changes to be added to the Git-timeline (staging) <br>
+         (3) adding changes to the Git-timeline (committing) and <br>
+         (4) adding changes to GitLab/GitHub (pushing) with ...**
 
 `````{tab-set}
 ````{tab-item} ... Git in VS Code
 
+1. Make some changes to a file in for example VS Code and save them.
 
-```{error} To be written
-```
-Make some changes in for example VS Code and save them.
-
-
-Select files ready to be added to Git-timeline (staging)
+2.  Select the files ready to be added to Git-timeline (staging) 
 
 For demonstration purposes, we have created a new Markdown file called `new-chapter.md`, which we want to add to the book. Since this is a new file, Git has no knowledge about its existence yet. I.e., the file is *untracked*. To add new files to our repository, we need to *stage* and *commit* them. To do this, open the Source Control menu in the left side bar. Our new file should appear in this menu:
 
@@ -62,14 +99,14 @@ The new file appears in the Source Control menu.
 
 Notice that there is a green letter U placed besides the file, meaning that our file is untracked. To add a file to the *staging area*, click on the + that appears when you hover over the file. 
 
+3. Adding changes to the Git-timeline (committing)
+
 Next, in the field that says "Message", write a short description of the changes you have made. This message is what is called the *Commit Message*. After we've done this, the menu should now look something like this:
 
 ```{figure} ../images/git-file-added.png
 
 The new file has been staged, and we've written a Commit Message.
 ```
-
-
 Now, we are ready to add the changes to the repository. This is done by *committing* the staged changes. To do this, simply press the big, blue "Commit" button in the Source Control menu. 
 
 In the bottom left corner, next to the branch name, click the "Synchronize Changes" button (the one that looks like this: 🔄, highlighted in the image below) to push the changes to GitLab.
@@ -81,31 +118,33 @@ After committing, click the 🔄 button to push our changes to the remote reposi
 ````
 ````{tab-item} ... GitHub Desktop
 
-```{error} To be written
-```
-Make some changes in for example VS Code and save them.
+1. Make some changes to a file in for example VS Code and save them.
 
-The staging GitHub Desktop assumes you want to stage all files. You can unselect some of them (unstaging them)...
-```{error} To be written
-```
+2. The staging GitHub Desktop assumes you want to stage all files. These files will show up on the left side bar when you open GitHub Desktop. You can unselect some of them (unstaging them) by clicking on the *check*. 
 
-Add changes to Git-timeline locally (committing)
+<figure align="center">
+    <img src="figures/Stage_GitHubDekstop.PNG" alt="Example Image" width="400">
+</figure>
 
-```{error} To be written
-```
+3. Add changes to Git-timeline locally (committing). In the field that says `Summary(Required)`, write a short description of the changes you have made. This message is what is called the *Commit Message*. After we've done this, click the blue button `Commit to Repositery`.
 
-Add changes to GitHub/GitLab (pushing)
-
-```{error} To be written
-```
+4. Now we need to add changes to GitHub/GitLab. This is called pushing to the local repositery. After committing, the following screen will pop up. Click on `Push Origin`.
 
+<figure align="center">
+    <img src="figures/Push_GitHubDesktop.PNG" alt="Example Image" width="650">
+</figure>
 ````
 `````
 ``````
 
-``````{tab-item} ... existing version (branch)
+``````{tab-item} ... an existing version (branch)...
 
-**... by regularly obtaining updates from colleagues from GitLab/GitHub (pulling), solving potential incompatible changes (merge conflicts), making changes on a single / multiple file(s), selecting changes to be added to the Git-timeline (staging), adding those to the Git-timeline (committing) and adding those changes to GitLab/GitHub (pushing) with ...**
+**... by (1) regularly obtaining updates from colleagues from GitLab/GitHub (pulling),
+         (2) solving potential incompatible changes (merging conflicts), 
+         (3) making changes on a single / multiple file(s), 
+         (4) selecting changes to be added to the Git-timeline (staging), 
+         (5) adding those to the Git-timeline (committing) and 
+         (6) adding changes to GitLab/GitHub (pushing) with ...**
 
 `````{tab-set}
 ````{tab-item} ... Git in VS Code
@@ -119,9 +158,13 @@ If you collaborate with colleagues on this branch, you can get the updates from
 ````
 ````{tab-item} ... GitHub Desktop
 
-text..
-```{error} To be written
-```
+1. Obtain updates from colleagues from GitLab/GitHub (pulling). This synchronizes the remote repositery with your local repositery on your machine. Click on `Fetch` in the top bar.
+
+<figure align="center">
+    <img src="figures/Fetch.PNG" alt="Example Image" width="650">
+</figure>
+
+2. When multiple people work on one chapter, it is possible that conflicts will arise. This means that two users might have cheanged the same sections. GitHub Desktop will recohnize this Solve potential incompatible changes (merging conflicts)
 
 ````
 `````